Automatic Lightweight EPS Cement Sandwich Wall Panel Machine, Construction Partition Wall Panel Making Machine
Wall panel for concrete precast houses:
1.Full Automatic
2.Eco Saving and Advanced Technology
3.Low cost
4.ISO9001-2000
Take an EPS Wall Panel production line with annual capacity 200,000m2 for example (700 m2 / day):
(1). An EPS Wall panel production line with annual capacity 200,000m2.
(2).The raw materials cost to produce one square meter of EPS Wall panel ( take 90mm thickness panel for example).
(3).Costs above calculated based on the below cost table:
(4).Other costs
(5).Based on the above table, the total production cost is: 37 RMB/m2.
(6).Annual Estimate Benefits
According to China domestic normal selling price:EXW 65RMB/m2
Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.
(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.
(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.
(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the bad temperature control.
(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.
(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and material conveying to silos.
(7)Most components are of world-famous brands, with reliable performance, stable quality, long service life and low maintenance cost.
(8)The machine can realize the primary and second expansion.
How are the land,water,power required to set up an EPS light weight wall panel production line?
Water requirements: to produce 60m2 panel(9 cm thickness as example) required one ton of water. No special requirements for water quality, clean water can be used for production.
Electricity requirement: installed power 30 kw (depending on the capacity).
Requirements on air and steam: Air compressor and boiler.
Land requirements: 1200-2000m2 workshop and 9 meters high (depending on the capacity).
Suggested Staffing Table:
Our factory
Group'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Tech Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit
If you are interested in any product of our company, please feel free to contact me.
Any inquiry would get our professional and prompt reply!
Contact Information:
Foreign Trade Dept. : Emily Lee
Guangxi Hongfa Heavy Machinery Co., Ltd.
Cell / What's up:+86 15177094840
Wesite: gxhongfa.en.made-in-china.com
Wall panel for concrete precast houses:
1.Full Automatic
2.Eco Saving and Advanced Technology
3.Low cost
4.ISO9001-2000
Take an EPS Wall Panel production line with annual capacity 200,000m2 for example (700 m2 / day):
(1). An EPS Wall panel production line with annual capacity 200,000m2.
(2).The raw materials cost to produce one square meter of EPS Wall panel ( take 90mm thickness panel for example).
| Materials | Cement | Fly ash | EPS | additive | Silica panel | Water and power | Labor costs | total |
| RMB/m2 | 8 | 3.4 | 6 | 0.5 | 13.4 | 0.52 | 3 | 34.82 |
(3).Costs above calculated based on the below cost table:
| Materials | Cement(ton) | Fly ash (ton) | EPS(ton) | Additive(ton) | Silica panel(m2) | Water | Power(kw) | Worker salary(person/month) |
| Price(RMB) | 330 | 140 | 13000 | 5000 | 6.7 | 0.5 | 0.9 | 3000 |
(4).Other costs
| Cost categories | Management costs | Equipment depreciation | Depreciation of buildings | Maintenance Charge | total |
| RMB/m2 | 1.00 | 0.50 | 0.30 | 0.20 | 2.00 |
(5).Based on the above table, the total production cost is: 37 RMB/m2.
(6).Annual Estimate Benefits
According to China domestic normal selling price:EXW 65RMB/m2
| Annual Output Value(RMB) | Selling expense(RMB) | Annual production cost(RMB) | Annual Profits (RMB) |
| 65×200,000m2 | 13,000,000×5% | 200,000x 37 | 13,000,000-650,000-7,400,000 |
| 13,000,000 | 650,000 | 7,400,000 | 4,950,000 |
Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.
(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.
(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.
(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the bad temperature control.
(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.
(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and material conveying to silos.
(7)Most components are of world-famous brands, with reliable performance, stable quality, long service life and low maintenance cost.
(8)The machine can realize the primary and second expansion.
How are the land,water,power required to set up an EPS light weight wall panel production line?
Water requirements: to produce 60m2 panel(9 cm thickness as example) required one ton of water. No special requirements for water quality, clean water can be used for production.
Electricity requirement: installed power 30 kw (depending on the capacity).
Requirements on air and steam: Air compressor and boiler.
Land requirements: 1200-2000m2 workshop and 9 meters high (depending on the capacity).
Suggested Staffing Table:
| Position | Amount(Person) |
| Moulding/poring | 1 |
| Demoulding&Packing | 1 |
| EPS Expander Operation/raw materials | 1 |
| Mixer Operation | 1 |
| Transportation | 1 |
| Total | 5 |
Hongfa Group Established in 1990.
A leader developer& Manufacturer of Construction Material Machinery.
Main business Range & Products:
Lightweight Panel Production Line, AAC Block Production Line, Full Automatic Concrete Block Production Line, Artificial Quartz Plate Production Line, Concrete Pipe Machine, Concrete Tile Machine, Concrete pipe machine, Bidirectional Hydraulic Brick Maker, Mining Machinery, Concrete Batching plant, Stereo Parking Equipment, etc.
Hongfa Strengths
More than 26 years experience. 1500 employee (50+engineers)
2) Total 4 factories with 440,000M2 and annual sell above USD100 Million .
3) 10,000 customers and fulfillment to over 120 countries.
4) Continuous service and logistics system.
5) High quality products and competitive price.We hope we can cooperate with each other and establish a win-win business relationship.
Our factory
Group'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Tech Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit
If you are interested in any product of our company, please feel free to contact me.
Any inquiry would get our professional and prompt reply!
Contact Information:
Foreign Trade Dept. : Emily Lee
Guangxi Hongfa Heavy Machinery Co., Ltd.
Cell / What's up:+86 15177094840
Wesite: gxhongfa.en.made-in-china.com