Siding Material Moulds Lightweight Concrete Panels for Floor/Roofing

Wall board Material Mould Lightweight Concrete Panel for Flooring/RoofingMould Concrete PanelSurface :fiber cement board/calcium silicate boardInterior filling materials: EPS / cement / fly ash / sand / additive          Features FeaturesMore Detail1green100% free

Featured Products

Wall board Material Mould Lightweight Concrete Panel for Flooring/Roofing

Mould Concrete Panel

Surface :fiber cement board/calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive   

Wall Board Material Mould Lightweight Concrete Panel for Flooring/Roofing       


Features

 FeaturesMore Detail
1green100% free of harmful substances and are of A non-radioactive products, 100% Non-asbestos.
2lightweight economicThe volume-weight only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 54kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry.
3increase valid spacethe thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. in other words, it can increase 6/m2 per 100/m2 .
4moistureproof waterproofwill keep dry and leave no stains. During humid days, the boards will not condense water either. suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof.
5fireproofFireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard.
6heat insulationZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level.
7sound insulationThe raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB.
8walls can be nailed and groovedZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on.
9good integrationBy using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry.
10easy and fast constructionIt can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of pl
 

Specification & Application 

1. Partition,indoor wall, outdoor wall of non load bearing wall
2. The renovation of the old buildings
3. Other condition which have strong requirements of the moisture proof, waterproof, fireproof, sound insulation.

Length 
(mm)
Width 
(mm)
Thickness 
(mm)
Density 
(kg/m2)
ApplicationAppearance


2270
 
2440



610
6038±2%Non-load bearing wall 
of houses and buildings
With calcium silicate 
board as face board, 
Solid core
7547±2%
9056±2%
10066±2%
12080±2%
15099±2%

Wall Board Material Mould Lightweight Concrete Panel for Flooring/Roofing

 

Easy Install

Wall Board Material Mould Lightweight Concrete Panel for Flooring/Roofing

      

Contact Us
Wall Board Material Mould Lightweight Concrete Panel for Flooring/Roofing

 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours