Lightweight composite exterior/interior concrete wall insulation sandwich panels for hotels

Lightweight Composite External/Interior Concrete Wall Insulation Panels For HotelsCompositionZJT EPS (Expanded polystyrene board) wall Panel is composed of exterior panels and interior core filling, to form a non-load-bearing light-weight composite wall panel. The exterior panels on both sides are 5mm calcium silicate

Featured Products

Lightweight Composite External/Interior Concrete Wall Insulation Panels For Hotels

Composition
ZJT EPS (Expanded polystyrene board) wall Panel is composed of exterior panels and interior core filling, to form a non-load-bearing light-weight composite wall panel. The exterior panels on both sides are 5mm calcium silicate board, and the middle core is filled with polystyrene beads & cement or ceramsite, polystyrene beads & cement

Lightweight Composite External/Interior Concrete Wall Insulation Sandwich Panels for Hotels


Specification
Lightweight Composite External/Interior Concrete Wall Insulation Sandwich Panels for Hotels


Technical Index
ItemParameter Index Specifications
60mm75mm90mm100mm120mm150mm
1Anti-impact capacity/times≥5≥5≥5≥5≥5≥5
2Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.0
3Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5
4Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8
5Surface density(kg/m²)≤70≤70≤90≤90≤110≤110
6Moisture rate(%)≤10≤10≤10≤10≤8≤8
7Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5
8Hang force(N)≥1000≥1000≥1000≥1000≥1000≥1000
9Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥50
10Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.5
11Heat transfer coefficient(w/m².k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0
12Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change
15The combustion properties(A1 or A2)__A1 or A

The Recycled Utilization Ratio Reaches to 73%-91


 
 Advantages 
1).Heat Insulation and Preservation The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which can adjust the indoor temperature at a constant range to achieve the effects of ecological adjustment.
2).Waterproof and FireproofThe face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials are the mixture of cement, sand, fly ash, etc.
3).Sound Insulation and AbsorptionThe inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
4).Easy Construction and Time SavingFor the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part.
5).High Intensity and Quake ProofThe energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.
6).Space and Cost SavingFor its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.
7).High Recycled Ultilization Ratio The panel is solid and strong physical performance,anti-corrosion,high strength and low damage rate.If ZJT's dry splicing method was put to use ,wall panel reuse rate would up 93%which can save 71%~95% of wall panel cost.
8).Strong Hanging Force and can be Slotted ZJT panel can meet various of demand, be easily slotted hole and also will reduce dust and increase the operation environment quality.

Lightweight Composite External/Interior Concrete Wall Insulation Sandwich Panels for Hotels

Application
:

residential building, school,hospital, prefab house, office,

hotel, public construction, entertainment place,etc.
wall/exterior wall/interior wall/super high wall/abnormity wall,
roof, floor, pipe, fire well, equipment partiton,etc.
 1. Non-load bearing wall panel for high grade house
 2. The building with higher requirement of sound proof, fire-proof and damp resistance.
 3. Microclimate adjustment system and passive fire protection system.
 4. Building at seismic area equal to or less than 8 magnitudes.
   
                      ZJT Sandwich Panel Applications
1).Floor Application ZJT light weight compound sandwich panel can be innovatively used as floor board. This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
2).Villa&Exterior Wall Application Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.
3).Interior Partition Application Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
4).Roof Application Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. Its easy construction time brings out its hight integrated performance.
5).Pipe/Fire Well/Equipment Partition Application ZJT light weight energy-saving sandwich wall panel has features of lightweight , easy cutting,dry used,and easy installation.It is the most suitable wall panel for pipe well, air sharft, fire well ,equipment partition and room partition wall.
 Installation                                             
Lightweight Composite External/Interior Concrete Wall Insulation Sandwich Panels for Hotels

 About us
Lightweight Composite External/Interior Concrete Wall Insulation Sandwich Panels for Hotels

 

Certificate
Lightweight Composite External/Interior Concrete Wall Insulation Sandwich Panels for Hotels

  
 

Please contact
Ian
Xiamen ZhongJingtai Building Materials Co.,Ltd
Web: zjteps.en.made-in-china.com
Tel:  86-592- 5216902   
Mobile: +8618577342631

 

 
 




FAQ
.Are you factory or trading company?
Our factory was built in 2003, We have a high speed production process and quality management system.
.Could I get a discount?
If your quantity is more than our MOQ,we can offer a good  discount according to your exact quantity.We can ensure that our price is very competitive in the market based on good quality
.Can you offer some sample?
We are glad to offer some samples free 
.How about your delivery time ?
within 12 days after receiving your prepayment .
.How is your quality?
Our products are very popular in the international market. 
even surface, firm welded structure, precise opening etc. It has the good properties
High strength, high visibility, age resistance





 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours