Ready to Assemble Precast Wall Panel Partition Wall Board Office Building/Apartment/Hospital
Information of Partition Wall
EPS sandwich panel is a new generation of high-performance wall panels produced by industrialization. It is composed of a variety of raw materials such as portland cement, sand and fly ash and replaces traditional bricks and hollow blocks. It has the advantages of environmental protection, energy saving and pollution-free, lightweight earthquake resistance, fire prevention, heat insulation, sound insulation and fast construction.
EPS sandwich panel has its own three-in-one structure, which has light weight and high strength. It adopts assembly construction. The wall panel is interlocked with the wall panel to form a whole, and its impact resistance is better than ordinary masonry. It is anchored by the steel member method. Riveted to structural columns and beams, the overall performance is stable, the net load of the building can be reduced, and it can be fixed on the structure to improve the structural safety factor of the building, which can effectively prevent earthquakes and never collapse.
According to statistics, the use of lightweight sandwich panel materials can save about 30% of the total cost of construction, and the plate wall can at least increase construction efficiency by more than 3 times than the wall of blocks and bricks.
Strength of Partition Wall
Can reach 4h above under the high temperature of 1000C. It can't send out poisonous gases but more guarantee for your security. Fireproofing can be reached the standard of Nation Class A1.
2) Enlarge using area
Enlarge using area, generally uses 75mm wall board. Less than 85mm thickness comparing with 160mm brick wall facing's.
3) Moisture proof and waterproof
Experiments prove that without any waterproof facing, our sandwich panel can be bonding by cement as a pool and filled with water, and the back of the wall can keep dry and leave nothing traces, and it can't produce condensate water beads in the moist weather. Also,the board is a specialized waterproof and fireproof panel with good waterproof and moisture proof performances,applicable to moist areas such as kitchen, toilet,basement etc.
4) Easy and Civilized Construction
Civilized, simple and fast construction. Sandwich panel system is a completely dry project and construction. The wall can be cut arbitrary to adjust the width and length.Laconic construction and transportation, healthy stacking. No plastering,cut down the construction period enormously , and reduce the material wastage rate and reduce building garbage.
5) Hang nail
Can be directly put nails on it or hanging heavy things with expansion bolt, such as air condition. Single-point hanging force reaches 45kg above,which solves the weakness of hanging heavy things on the hollow bricks and cavity wall board. Also the surface of the wall board is straight and smooth without producing dust. It can be directly pasted ceramic tile,wall paper wooden-decoration board,marble,aluminum plastic board and other material.
6) Environmental protection
Green environmental building materials, which certificated by State Environment Protection Administration. 100% no harmful substances to the people, no radioactive A products, which meets the standard of State GB6566-2001 without any restrictions of application range.
7) Good entirety
Due to the fabricated construction and three-in-one structure itself, the boards can be joggled as a whole with each other. So its shockproof performance is 7.5 times of the general masonry. Anchor by using steel structure. The wall is high-strength, it can be high layer and large span of partition,Our sandwich proof performance is more 10 times than the general masonry, our sandwich panel system has compact structure,good integrity,not easy looseness, good quake-proof and no cracking. Solves the weakness of cracking and soaking on the sand-lime brick and cavity wall board.
8) Sound insulation
Good soundproof, the fibe cement board,which is on the surface and its interior materials have good soundproof function. The board of 100mm thickness has 50dB sound insulation volume, its sound insulation effect exceeds enormously the requirement of national residences and is higher than the effect of other general masonry.
9) Heat preservation and thermal insulation
Our panel is made up by portland cement, high purity quartz powder, inorganic fiber and plant fiber after high temperature and high pressure maintenance, which makes it good heat insulation and thermal insulation function and offers your indoor environment more comfortable, and save electricity from air condition.Our sandwich panel has ability to automatically adjust the water content of indoor air, makes humidity constant, each the effect of ecological regulation, and meet the developing trend of modern residential building.
10) Light weight and Economic
Light texture, arbitrary interval, 75mm thickness of our sandwich panel is 1/6 weight equivalent to 120mm thickness of general masonry, so it cuts down the structural cost. According to many aspects such as enlarging using areas, civilized construction, simple and fast, cutting down the structural cost, its construction cost is very cheap. As for each extending 11.8m can be added 1m using areas,
11) High Effect and Short Construction Period
Due to fabricated construction, average one skilled worker can install more than 36m in one day. Also, double faces of our sandwich panel are smooth without wiping mortar, its efficiency improves more 15 times than general masonry. Only require accurate stay guy, it can be installed no matter how big or small the project is. After installation, it can be decorated, and continued to constructing without wiping mortar or waiting for the mortar reaching the requirement of strength. Also, it is very convenient and fast, within 3m height can be constructed without scaffold.
Standard Size and Application of Partition Wall
|610||60||roof for villa, prefabricated house, makeshift house|
|75||roof for villa, prefabricated house, makeshift house|
|90||interior partition wall for house, office building, residential, school, hotel|
|100||interior partition wall for high rise building, mansion, hospital|
|120||exterior wall for warehouse, commercial building; floor with structure|
|150||exterior wall for college, shopping mall, row house,commercial place|
It can be used as both interior and exterior partition walls, or all kinds of decoration and building construction. Also the best material for plants, apartments, hotels, office buildings and public constructions, ect.
In addition, they are used for compartments, households, bathrooms, the interior partition walls of kitchens. In the high-rise building and housing renovation projects.
1. Card Slot
2. Special putty powder for interior wall
1) Dosage: Theoretical consumption value: 1-1.5 kg/m2 (putty thickness 1 mm).
2) Mixing: The water required is based on the construction consistence required. After mixing evenly, place for 10 minutes and then mixing again when you apply.
3) Surface treatment: The wall surface should be solid and without ash and dirt, and the water content of the wall surface should be less than 5%.
4) Interface Treatment: If the wall surface is smooth or a new-type building material, such as gypsum partition board, polystyrene board, paper-faced gypsum board, etc., an interface agent should be used for interface treatment.
5) Leveling: Leveling of putty powder should be done in a semi-dry state (lightly pressed by hand without deformation). After curing, leveling with emery cloth is possible.
6)Product standard: JG/T298-2010(Y)
7) Construction temperature: Above 5ºC, the curing process temperature is not lower than 0ºC.
8) Storage and transportation: Store in a cool and dry place with a shelf life of 6 months. The product is non-toxic and non-flammable, and storage and transportation can be handled in accordance with the "Non-Dangerous Goods Rules".
9) Safety and environmental protection, efficient leveling, water and alkali resistance, durable and strong.
Xiamen ZhongJingTai Building Materials Co,. Ltd